There are several ways to obtain the required training for Class A/B Operators:
UST Regulatory & Compliance Section, 803-898-0589
Every facility must have someone trained to be a Class A/B operator and a Class C operator.
Yes. If a facility does not have a trained Class A/B operator, the facility will be in violation.
All facilities with tank systems currently in the ground fall under this requirement; including emergency generator sites and sites that are not being used.
Operator Training applies to all facilities with tanks still in the ground, no matter when they were last used.
Yes.
Yes.
Class A/B operators are responsible for the daily operations and maintenance and monthly monitoring of the underground storage tank system.
Class C operators are responsible for emergency response in the event of a release or emergency on site. This is most likely going to be a retail salesperson. Class C operators are to be trained by a certified A/B operator.
Class A/B operators do not have to be on-site at all times. The requirement for them is to visit the facility once a quarter to make sure that all monitoring and maintenance is being done properly.
One Class C operator must be onsite at all times while the facility is operating. Class C operators are the people who work at the facility.
Class A/B and Class C operators must still be trained for the facility. A placard or sign must be installed at the fueling point with a 24-hour emergency contact who would know what to do in the event of an emergency.
Anyone can be an operator as long as they are properly trained. A tank owner can do it themselves or they can hire someone to do it for them.
No. As long as the operator can visit each facility within the quarter, there is no maximum limit.
Once the Division has approved the method of training, it can be used as a form of Operator Training.
A new Class A/B Operator has 30 days after starting the position to get their training.
A new Class C operator must be trained before they take primary responsibility for the facility.
Retraining is not required as long as the facility (facilities) for which an operator is responsible stay(s) in compliance. If a facility is found to be out of compliance, retraining for the Class A/B operator is required.
There is no retraining requirement for Class C operators.
For small violations, retraining will occur at the time of the compliance inspection. For severe or multiple violations or if the Class A/B operator is not available at the time of the inspection, retraining will occur depending on the situation.
A training certificate with the name, date, and method of training along with a list of facilities that the Class A/B operator is responsible for must be sent in to provide proof of training.
Class A/B training records should be sent to Columbia and a copy should be kept at the facility. Class C training records should be updated by the tank owner and should be kept on file at the facility.
Courtney Evans at (803) 898-0587
