The Groundwater Program delineates and maps the principal aquifers and confining units of the Coastal Plain.
Overview
Groundwater is a major source of water for public supply, irrigation, industry, and power generation. The Coastal Plain covers two-thirds of the State yet contains about 95% of its groundwater resources. It consists of layers of unconsolidated sand, clay, and limestone. Sand and limestone layers are porous and constitute the water-bearing zones called aquifers; clay layers are relatively impervious and constitute the confining units.
In an ongoing study, SCDES is determining the location, depth, and thickness of the major aquifers and confining units utilizing data collected from water wells and core holes. Cores, which are cylindrical samples of the earth, provide information on the physical properties and boundaries of the aquifers and confining units. Core samples are also examined for microfossils, which are useful in correlating the aquifers and confining units across the State. Geophysical logs from water wells are used to identify and map the aquifers and confining units in those areas where cores are unavailable.
This information is used to construct hydrogeologic cross sections and maps depicting the spatial distribution of the principal aquifers and confining units of the Coastal Plain.
Hydrogeologic Framework
Hydrogeologic Cross Sections
Fourteen hydrogeologic cross sections were constructed using 42 cores and 68 water wells. The sections depict the distribution, thickness, and continuity of aquifers and confining units of the South Carolina Coastal Plain. Seven of the sections (A, B, C, D, E, F, and F2) are drawn along stratigraphic dip and traverse the Coastal Plain in a northwest–southeast direction; seven (G, G2, H, I, J, K, and L) are drawn along stratigraphic strike and traverse the Coastal Plain in a southwest–northeast direction. All sections are referenced to mean sea level. Depth below land surface and depth relative to sea level are indicated for each well. One inch on the vertical scale is equivalent to 200 feet of borehole. Distances between core holes and wells are provided along the top of each section. Confining units are shaded gray, aquifers white, and bedrock pink. A graphic lithologic column is provided for the core holes and for a few select water wells that had detailed geologic logs made from drill cuttings. A key to the lithologic units is provided on each section. Geophysical logs are included for each core hole and well that include an overlay of the gamma-ray and spontaneous potential logs positioned left of the depth column, and an overlay of the single-point resistance, short-normal resistivity, and long-normal resistivity logs positioned to the right of the depth column. Some geophysical logs were not available for a few of the core holes and wells and thus were excluded from the section. Many of the downdip core holes and wells did not reach bedrock. In those cases, depth to bedrock was estimated and aquifers and confining units were projected down to bedrock. Descriptions of each water well and core hole used to create the sections are provided.
Unit Top, Bottom and Thickness
A spreadsheet showing the thickness of each aquifer and confining unit and the depth and elevation to the top and bottom of each unit is provided. Numbers in italics were estimated.
Core Descriptions
Detailed descriptions of the cores in terms of their lithology, grain size, sorting, induration, mineralogy, fossils, structures, and color are provided. Cores were described by geologists with the U.S. Geological Survey (USGS), Westinghouse Savannah River Company (WSRC), South Carolina Water Resources Commission (SCWRC), Clemson University, and the South Carolina Department of Environmental Services (SCDES) including the following individuals:
Karen W. Agerton (SCDES)
Laurel M. Bybell (USGS)
Raymond A. Christopher (Clemson University)
Bill Clendenin (SCDES)
Lucy E. Edwards (USGS)
William F. Falls (USGS)
Joseph A. Gellici (SCDES)
Gregory S. Gohn (USGS)
Mary Harris (WSRC)
Brenda L. Hockensmith (SCDES)
Robert W. Logan (SCWRC)
David C. Prowell (USGS)
Jean M. Self-Trail (USGS)
Gregory C. Simones (SCWRC)
Well Logs for Water Wells and Core Holes
A well log for each core hole and water well is provided. Each sheet contains geophysical logs, depth and elevation, lithology (where available), screen settings, and the aquifer and confining units.
Selected Reports
SCDNR Water Resources Report 5: Hydrogeologic framework of west-central South Carolina (1995) Aadland, R.K., Gellici, J.A., and Thayer, P.A.
SCDNR Water Resources Report 42: Hydrostratigraphy of the ORG-393 core hole at Orangeburg, South Carolina (2007) Gellici, J.A.
SCDNR Water Resources Report 43: Hydrostratigraphy of the AIK-2448 and AIK-2449 core holes in the Breezy Hill area of Aiken County, South Carolina (2007) Gellici, J.A.
USGS Professional Paper 1773: Groundwater availability in the Atlantic Coastal Plain of North and South Carolina (2010) Campbell, B.G. and Coes, A.L., editors.
Contact Information
For additional information, contact Joe Gellici (joe.gellici@des.sc.gov).